HOME \ PRODUCTS \ Analytical Equipment \ Solartron Analytical (AMETEK) \ Electronics & Control Systems Testing

Electronics & Control Systems Testing

	Model 1260A Impedance/Gain-phase Analyzer 10 µHz to 32 MHz operating frequency range, 0 - 3 V/0 - 60 mA rms voltage/current generator output, 0.015 ppm frequency resolution, 0.1% magnitude and 0.1 degree accuracy, 0.001 dB and 0.01 degree resolution, built-in current converter allowing direct impedance measurements up to > 100 MΩ, 2 and 4 terminal measurement configurations, can apply polarization voltages in range +/- 40.95 V. Singe-sine detection mode. Manual or computer control via IEEE488 (GPIB) interface
	Model 1255B Frequency Response Analyzer 10 µHz to 1 MHz operating frequency range, 0 - 3 V voltage generator output, 10 µHz max. frequency resolution, 0.2% magnitude and 0.2 degree accuracy, 0.02 dB and 0.2 degree resolution, can apply polarization voltages in range +/- 40.95 V. Singe-sine detection. Computer control only via IEEE488 (GPIB) interface.
	Model 1252A Frequency Response Analyzer 10 µHz to 300 kHz operating frequency range, 0 - 3 V voltage generator output, 10 µHz max. frequency resolution, 0.2% magnitude and 0.2 degree accuracy, 0.02 dB and 0.2 degree resolution, can apply polarization voltages in range +/- 40.95 V. Singe-sine detection mode. Computer control only via IEEE488 (GPIB) interface.
	Model 1250E Frequency Response Analyzer 10 µHz to 65 kHz operating frequency range, 10 µHz max. frequency resolution, 1% magnitude and 3 degree accuracy, 0.02 dB and 0.2 degree resolution, can apply polarization voltages in range +/- 10.23 V. 30 mV to 300 V FS sensitivity, singe-sine detection mode. Optional synchronizer input. Optional modulator/demodulator function. Manual or computer control via IEEE488 (GPIB) interface.
	Model 1253A Frequency Response Analyzer 1 mHz to 20 kHz operating frequency range, 1 mHz max. frequency resolution, 1% magnitude and 1 degree accuracy, 0.02 dB and 0.2 degree resolution, can apply polarization voltages in range +/- 10.22 V. Singe-sine detection mode. Manual or computer control via IEEE488 (GPIB) interface.

Return